|
|
| The
difference between a wet blasting and a dry blasting machine is that
the former can not be applied to cleaning grease and filth, while
the latter has no such problem. For the surface of a golf workpiece
that needs to get rid of the material which rises in temperature at
blasting, the wet type is more suitable than the dry type. The most
important feature is the application of micro-powder sand, in which
the dry type can produce a particular result, whereas the wet type
is limited in this respect. Generally when the sand size is bigger
than 400#, consideration should be taken in the application of a wet
blasting machine. |
| Features: |
| 1. |
Can use very small sand, applicable
to the surface treatment of precision workpieces. |
| 2. |
With the application of the recycle
of blasting liquid, the consumption of sand becomes lower and
the operation cost is more economic. |
| 3. |
Excellent closedness, no pollution
of dust produced. |
| 4. |
Simple operation, few failures
produced; space closed, low noise. |
| 5. |
With the function of window-cleaning,
at use the visibility is excellent. |
| 6. |
The body is made of stainless
steel. Durable and hard-wearing. |
|
|
| 7. |
If necessary, an inhibitor can be added
into the blasting liquid to prevent iron workpieces from rusting. |
| 8. |
Provided with an anti-dust and waterproof
fluorescent lamp. |
| 9. |
Equipped with a clean-water cleaning
device, not only for cleaning the workpiece but for preventing sand
material being brought out of the sand cabin. |
| 10. |
Full-closed rubber waterproof gloves
are made from non-woven cloths for the linings, the contact being
comfortable. |
| 11. |
Can be custom-made into automatic blasting
machines. |
| 12. |
Optional for air-pump mixing-type or
water-pump mixing type. |
| |
a.The
air-pump type is lighter and cost-effective, suitable for customers
with small quantity of workpieces. The pumps will not have friction
with the sands so the wearing is smaller.
b.
The water-pump type is more expensive but
the blasting efficiency is higher. Suitable for customers whose quantity
of workpieces is large. But the vanes of the pump will have friction
with the sand so the wearing is larger. |
| Application: |
| Precision
molds, electronic parts, piston rings, aviation parts, pre-treatment
of titanium-electro-plated workpieces, circular saw pieces, greasy
workpieces, etc. |
|
