|
TM-VTH
Carriage Type Sand Blasting Cabinet
|
Options of types of sand blasting cabinets→ |
|
|
|
| Features: |
| 1. |
At operation all the operator needs
is lift upon the carriage disk outside machine by drawing
on the shop traveler, and then push the carriage into the
machine for blasting operations. Considerably convenient and
energy-saving. |
| 2. |
Special cart design:
can retrieve the carriage in the blasting cabin. Space-saving. |
| 3. |
How to place and retrieve a workpiece:
this type is accessible from the front door and side-door
for workpieces. |
| 4. |
Standard feature: this model belongs
to TM-R blasting machines with carriage. For standard specifications,
see below. For more details, refer to features of R-type blasting
machine. |
| Application: |
| |
Heavier workpieces such as any types
of molds, lower wood parts, stone carvings, casts, motors,
repairs of aluminum wheel frames, wheel blades. |
|
|
|
Model
|
Turntable diameter
|
Turntable load
|
Size of front door entrance (mm)
|
Size of right-door entrance (mm)
|
|
TM-R6-VTH
|
ψ550mm
|
120kg
|
w750 * h650
|
500*600* h640
|
|
TM-R8-VTH
|
ψ600mm
|
120kg
|
w750 * h650
|
520*620* h640
|
|
TM-R443-VTH
|
ψ700mm
|
150kg
|
w1000 * h800
|
850*950* h740
|
|
| TM-VTF
Fixed-track carriage
blasting machines |
|
|
|
|
| Features: |
| 1. |
Applicable to blasting
of larger molds or heavyweight workpieces. |
| 2. |
At operation all the operator needs
is lift upon the carriage disk outside machine by drawing
on the shop traveler, and then push the carriage into the
machine for blasting operations. |
| 3. |
Easy to learn for operations
and maintenance. |
| 4. |
Equipped with an air-cleaning
device, not only for cleaning the workpiece but for preventing
the loss of sand material being brought out of the sand cabin. |
|
| 5. |
Provided with an anti-dust and waterproof
fluorescent lamp set, for the prevention of sand material breaking
the bulb endangering the safety of the operator. |
| 6. |
For other features, refer
to TM-R blasting machines. |
| Application: |
| |
Manual blasting of heavyweight workpieces
such as tire molds or cleaning of other heavyweight rubber molds. |
|
Model
|
Shop space (mm)
L*W*H
|
Entrance size (mm)W*H
|
Space required(mm)
L*W*H
|
Diameter of manual turntable(mm)
|
Turntable load
|
|
TM-VTF
|
1200*1120*897
|
930*440
|
2300*220*2450
|
ψ850
|
900
|
|
| (for reference only and subject
to change without further notice). |
|