|
TM-FD
bucket-type enclosed and pressurized blasting machines
|
Options of types of Pressurized blasting machines÷
|
|
|
|
|
|
| Features of
TM-FD bucket-type enclosed blasting machines: |
| 1. |
For
recycle of sand, this machine adopts bucket-type. Applicable
to any sand, even to sand material with great output and high
specific gravity such as steel grits and steel shots. |
| 2. |
For
nozzles with the same diameter, if the air output from the
air compressor is sufficient, the efficiency of the pressurized
blasting machine can reach 3-5 times that of a siphoning blasting
machine. |
| 3. |
The
faster the blasting speed, the deeper the crashed point. |
| 4. |
The
remote control system features manual pressure-releasing by
pressure-keeping transient-control for sand-fill, whereas
the system of automatic pressure-releasing sand fill by non-pressure-keeping
is also available. But the design of a drum-type auto blasting
machine is more peculiar for its feature. |
| 5. |
Equipped
with an air-cleaning device, not only for cleaning the workpiece
but for preventing the loss of sand material being brought
out of the sand cabin. |
|
|
| 5. |
Equipped
with an air-cleaning device, not only for cleaning the workpiece
but for preventing the loss of sand material being brought out of
the sand cabin. |
| 6. |
Provided
with an anti-dust and waterproof fluorescent lamp set, for the prevention
of sand material breaking the bulb endangering the safety of the
operator. |
7.
|
The
auto blasting system can be custom-made. But the design of a drum-type
auto blasting machine is more peculiar for its feature. |
| 8. |
The
capacity of a standard pressurized cylinder can accommodate 200-kg
aluminum oxide.
|
| |
| TM-FD
bucket-type enclosed blasting machines |
| Applicable to the speed
blasting of large quantity of small-and-medium-sized ordinary workpieces
and high-density workpieces, such as lost wax casting, thermal-treatment
workpieces, stone material, wood, precious stones. |
|
Suggestions for a single device of a pressurized
blasting machine with horsepower of air pressure.
|
|
Nozzle diameter
|
3mm
|
4mm
|
6mm
|
8mm
|
|
Requirement of the horsepower
of the air compressor
|
15HP
|
15HP
|
30HP
|
50 HP
|
| (The
requirement of the horsepower of the air compressor has already
calculated the additional 50% of air consumption from an expanded
nozzle diameter resulting from abrasion.) |
|
TM-FD
bucket-type enclosed and pressurized blasting machines
|
|
|
|
|
| Features: |
| 1. |
For nozzles
with the same diameter, if the air output from the air compressor
is sufficient, the efficiency of the pressurized blasting
machine can reach 3-5 times that of a siphoning blasting machine. |
| 2. |
The faster the blasting speed, the
deeper the crashed point. The faster the blasting speed, the
deeper the crashed point. |
| 3. |
For recycle of sand, this machine
adopts cyclone separation-type. Applicable to extremely thin
sand, even to 320# sand. |
| 4. |
The remote control system
features two types: non-pressure-keeping (auto pressure-releasing
and auto sand fill) and pressure-keeping transient control
(manual pressure-releasing for sand fill). |
| 5. |
Equipped with an air-cleaning device,
not only for cleaning the workpiece but for preventing the
loss of sand material being brought out of the sand cabin. |
|
| 6. |
Provided with an anti-dust and waterproof
fluorescent lamp set, for the prevention of sand material breaking
the bulb endangering the safety of the operator. |
| 7. |
The auto blasting system can be custom-made. But the
design of a drum-type auto blasting machine is more peculiar for
its feature. |
| 8. |
The size of the blasting cabin is the same as that
of a R cyclone enclosed blasting machine. Refer to the specifications
of the cyclone blasting machine. |
| |
|
| Applicable to the speed blasting
of large quantity of small-and-medium-sized ordinary workpieces
and high-density workpieces, such as lost wax casting, thermal-treatment
workpieces, stone material, wood, precious stones. |
|
Model
|
Shop space (mm)
|
Size of working entrance (mm)
|
Space required for the mainframe (mm)
|
Dust-Collection horsepower
|
|
TM-R-6F-FD
|
1000*750*875
|
750*650
|
1650*800*2210
|
2 HP
|
|
TM-R-6S-FD
|
1000*750*875
|
450*450
|
1650*800*2210
|
2 HP
|
|
TM-R-8F-FD
|
1100*800*875
|
750*650
|
1650*850*2210
|
2 HP
|
|
TM-R443-FD
|
1220*1220*1000
|
1000*800
|
2250*1350*2410
|
2 HP
|
|
TM-R555-FD
|
1525*1525*1525
|
1200*1200
|
2750*16700*2950
|
2 HP
|
|